Unfolded bent plate drawing
Not version-specific
Tekla Structures
Environment
Not environment-specific
Back to top
Back to top
Back to top
Purpose and description
Use Unfolded bent plate drawing extension to create the unfolded single-part drawing with the bent line for selected plates.
Back to topSystem requirements
Tekla Structures version: Not version specific
Environments: All
Installing Unfolded bent plate drawing
To install the extension:
- Download Plate Work Tools installer package from Tekla Warehouse. For more information see Downloading an application from Tekla Warehouse.
- Install the file package.
Using Unfolded bent plate drawing
To use the application:
- Open a Tekla model that already has a bent plate - it's working only for bent plates that are modeled using Attach to part command.
- Click the Applications & components button
Image
- Search for Unfolded bent plate drawing
Image
- The Unfolded bent plate drawing dialog window will open.
Image
- Using Select objects in components, select one or multiple bent plates.
Image
- Select desired options and click Create.
- If numbering is not up to date the fallowing message will appear: Number selected objects?. If you will press Yes the numbering will be performed, if you select No the drawings will not be created.
- The dialog displays a progress bar indicating the creation progress.
Image
- You can optionally cancel the drawing creation by clicking a Cancel button
- When the creation is complete, the application window will show you the following message: Drawing creation complete.
Image
- The value after the prefix (A) is the bending angle.
Example:
- If the plate is folded up
Image
- If the plate is folded down
Image
Application properties and buttons
Unfolded bent plate options
Field | Description | Default |
---|---|---|
Unfolding method | Define the unfolding method. The options are:
Image
Image
|
Center line |
Unfolded drawing options
Field | Description | Default |
---|---|---|
Drawing attributes | Define the drawing attribute. The options vary depending on the environment. |
standard |
Fold up line attributes | Define the fold up line attribute.
Image
Note: The user can create line attributes in Go Line properties. Image
|
FoldUpLine |
Fold down line attributes | Define the fold down line attribute.
Image
Note: The user can create line attributes in Go Line properties. Image
|
FoldDownLine |
Prefix on drawing | Define the prefix of the bent angle in the drawing. | A= |
Text attributes | Define the text attribute. Note: If the text does not align well, please set the Word wrapping in Text properties to Off option. |
UnfoldedBPD |
Text offset | Define the text offset. | X=0 mm |
Y=(text height/2)*4 mm |
Application buttons
Field | Description |
---|---|
Create | Use to create the drawings. During the creation, the button becomes inactive and a progress bar indicating the drawing creation progress appears. |
Cancel | Use to cancel the creation of the drawing. |
Additional information
- If errors occurred during the creation Show log button will appear, after clicking it, the log file will be opened in the default text editor.
Image
- If no part is selected, the user will get the following warning message: No objects selected.
Limitations
Select the chapter section corresponding to the extension version you want to use.
Plate Work Tools 3.5
Starting with Tekla Structures 2020 the Unfolded bent plate drawing extension supports the Document Manager, so you do not need to enable the Drawing list from the Advanced Options dialog box anymore.
For versions older than Tekla Structures 2020 that support Document manager you need to enable the Drawing list by setting the advanced option XS_USE_OLD_DRAWING_LIST_DIALOG to TRUE in the Drawing Properties category of the Advanced Options dialog box. This is because Drawing list macros are not supported in Document manager.
Starting with Tekla Structures 2018i version all the commands and buttons that would have launched Drawing list will launch Document manager. The Document manager is enabled by default instead of Drawing list.
For details about xs_use_old_drawing_list_dialog , see xs_use_old_drawing_list_dialog
For details about Document manager , see Document manager.
For details about Drawing list , see Drawing list.
For versions older than Tekla Structures 2020 that support Document manager you need to enable the Drawing list by setting the advanced option XS_USE_OLD_DRAWING_LIST_DIALOG to TRUE in the Drawing Properties category of the Advanced Options dialog box. This is because Drawing list macros are not supported in Document manager.
Starting with Tekla Structures 2018i version all the commands and buttons that would have launched Drawing list will launch Document manager. The Document manager is enabled by default instead of Drawing list.
For details about xs_use_old_drawing_list_dialog , see xs_use_old_drawing_list_dialog
For details about Document manager , see Document manager.
For details about Drawing list , see Drawing list.
Plate Work Tools 3.4, 3.3
Because Drawing list macros are not supported in Document manager, you need to enable the Drawing list by setting the advanced option XS_USE_OLD_DRAWING_LIST_DIALOG to TRUE in the Drawing Properties category of the Advanced Options dialog box.
Starting with Tekla Structures 2018i version all the commands and buttons that would have launched Drawing list will launch Document manager. The Document manager is enabled by default instead of Drawing list.
For details about xs_use_old_drawing_list_dialog , see xs_use_old_drawing_list_dialog
For details about Document manager , see Document manager.
For details about Drawing list , see Drawing list.
Starting with Tekla Structures 2018i version all the commands and buttons that would have launched Drawing list will launch Document manager. The Document manager is enabled by default instead of Drawing list.
For details about xs_use_old_drawing_list_dialog , see xs_use_old_drawing_list_dialog
For details about Document manager , see Document manager.
For details about Drawing list , see Drawing list.