Hello!

Did you know that logged in users can see a lot more content?

Area Reinforcement: Crossing bars tab

Last updated August 31, 2016 by Precast Extensions tekla.extensions-precast@trimble.com

Software version: 
2016
Environment: 
Not environment-specific

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planes

In Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.

It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.

size.

Properties

Property Description
Min spacing Define the minimum spacing between the normal crossing bars.
Prefered spacing Define the prefered spacing between the normal crossing bars.
Min overhang Define the minimum overhang for the crossing bars.
Grid size Define the grid size for the crossing bars.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet