NUMBER_IN_DRAWING shows the number of all rebars in a drawing that have the same position numberidentifier that is assigned to all similar parts, assemblies, cast units, or reinforcement
Position number consists of a prefix, separator, and running number. The prefix is part of the position number, identifying a numbering series. The running number is part of the position number, and is the assigned number in the numbering series, based on the start number. The separator is an optional character, such as a slash, that separates the prefix and the running number.
In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.
In the US, the term piece mark or ship mark is used to refer to a position number.
. The neighbor partpart that is close to a part that the drawing is made for but that is not in the same assembly or cast unit
The representation of neighbor parts is usually different from that of the part.
Neighbor parts can be used as reference in dimensioning.
rebars are ignored. Only use
NUMBER_IN_DRAWING in the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings
(1) Main part can be an assembly main part or a cast unit main part.
(2) input part that the user selects first when creating a component
(2) Connections and details always have a component main part.
marks in a drawing and not in the marks of the visible neighbor reinforcement.